Diaphragm Pumps
Aluminum, ductile iron or 316L stainless steel body with low temperature performance down to -18°C and high pressure performance up to 8.4 bar.
About PA Series
Metal diaphragm pumps (PA Series) are designed to withstand heavy industrial conditions with aluminum (AL), cast iron (CI), and AISI 316L stainless steel (SS) body options. The capability to operate safely at ambient temperatures dropping down to -18°C makes the PA Series indispensable for cold storage transfers, outdoor winter installations, and cold chemical processes. While polypropylene bodies become brittle at these temperatures, aluminum and steel bodies maintain their mechanical integrity completely.
The PA Series offers flow capacity ranging from 57 lpm to 894 lpm with a model range extending from 3/4" to 3". The maximum operating pressure is 7 bar in the PA 05 model and 8.4 bar in larger models (PA 10 and above). This series, which achieves a discharge head of up to 80 m, is preferred in applications where centrifugal pumps prove insufficient, such as in long pipelines or installations with high static resistance. Thanks to its mechanical shock resistance, it can be safely deployed in high-traffic areas, on vibrating platforms, and in mobile equipment.
In terms of chemical compatibility, the PA Series supports Santoprene, Neoprene, Buna-N (NBR), EPDM, FKM and PTFE diaphragm options. This flexibility addresses a broad fluid portfolio including petrochemical solvents, paints and varnishes, wastewater sludges and various industrial oils. Models with 316L stainless steel bodies demonstrate superior performance in chloride-containing environments and aggressive chemicals, while aluminum body models offer an economical choice for general industrial applications requiring a balance of cost and weight.
Technical Specifications
The PA Series, with its safe operating capability down to -18°C, performs tasks that plastic-bodied alternatives cannot achieve in cold storage facilities, cold chemical transfer, and winter outdoor installations. The metal body does not break or crack at low temperatures.
PA 10 and higher models are safely used in filter press feeding with 8.4 bar operating pressure, long pipe lines with high static resistance, and horizontal long-distance transfer applications.
Metal body completely eliminates the risk of plastic bodies breaking on vibrating platforms, installations near compressors, and in areas where accidental impact risk is high. It provides long service life.
PA Series metal-bodied models; with their natural conductive structure and ATEX certification, are safely used in Zone 1–2 (gas) and Zone 21–22 (dust) explosive atmospheres. It is the preferred standard in solvent and petrochemical transfer.
SS 316L body; offers resistance exceeding aluminum's limits against chloride-containing environments, saline solutions, and highly corrosive chemicals. It is preferred for the most demanding corrosive conditions, including marine environments and offshore applications.
The PA Series, thanks to Santoprene, Neoprene, Buna-N, EPDM, FKM and PTFE diaphragm options, covers a wide fluid spectrum ranging from mineral oils to petrochemical solvents, caustics to solvent mixtures with a single pump family.
Model Comparison
| Model | Connection | Maximum. Debut | Maximum Pressure | Basma Yük. | Body |
|---|---|---|---|---|---|
| PA 05 | 3/4'' | 57 lpm | 7 bar | 80 m | AL / DD / SS |
| PA 10 | 1'' | 160 lpm | 8,4 bar | 80 m | AL / DD / SS |
| PA 15 | 1.5'' | 400 lpm | 8,4 bar | 80 m | AL / DD / SS |
| PA 20 | 2'' | 565 lpm | 8,4 bar | 80 m | AL / DD / SS |
| PA 30 | 3'' | 894 lpm | 8,4 bar | 80 m | AL / DD / SS |
Product Series
Frequently Asked Questions
